Europe Middle East Africa Change

 

 

 Product

 

 

For more information, please download the TDS available in PDF format below.

​When stored in their original unopened packaging at a temperature of between –5°C and +30°C, BLUESIL RTV 3536 P A&B may be stored for up to 6 months from the date of manufacture clearly marked on the packaging.

Beyond this date, Bluestar Silicones no longer guarantees that the products meet sales specifications.

Part used drums should be resealed between each use.

Please consult the Safety Data Sheet of this product.Food Contact

BLUESIL RTV 3536 P B

​​BLUESIL RTV 3536 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material.

Release

2 Part RTV

Paste

Food Contact

  • Easy processing
  • Low linear shrinkage
  • Quick curing
  • Good imprint definition
  • Once cured according to the conditions given in this technical data sheet, the chemical composition of BLUESIL RTV 3536 P A&B conforms with the positive lists of products approved by the regulations in force in several countrie

For regulated applications, please contact Bluestar to ensure compliance and obtain the relevant statement.

​Taking quick imprints in the production of tooling and master prototype models sectors.

Production of moulds intended for moulding objects in chocolate, sugar, marzipan and for producing decorative sugar, pieces of bakery, biscuits and confectionery products.

Asia Pacific;Central and South America;Europe Middle East Africa;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Colorgreen lightPairedComp
AppearancepastePairedComp

 Characteristics_B

 

 

ColorwhitePairedComp
AppearancepastePairedComp

 

 

 Table_Characteristics_A_And_B

 

 

pot-life_0d649a54-7503-4c7c-a047-9d0c4b3e9f6apot-life_0d649a54-7503-4c7c-a047-9d0c4b3e9f6aPot life10PairedMixmin
hardness_cd523e03-72a3-4261-93f9-36f7bbeeafb1hardness_cd523e03-72a3-4261-93f9-36f7bbeeafb1Hardness30PairedMixISO 868sh.A

 

 

 

 

BLUESIL RTV 3536 P ABLUESIL RTV 3536 P A/our_offer/Product/90060923/90060920/BLUESIL-RTV-3536-P-A

 

 

Remix each of the two components (part A and B) every time before using.

It’s advisable to lightly grease your hands and the object to be copied with edible grease before to mix the two parts of BLUESIL RTV 3536 P A&B.

1. Mixing of the two components

To 100 parts of BLUESIL RTV 3536 P A add 100 parts by weight of BLUESIL RTV 3536 P B. The two components are thoroughly mixed together, either manually, or by means of a spatula.

2. How to use

Then the imprint is taken by pressing the product on the model. Ideally the imprint should be taken in one single application in order to avoid forming joints of the product on itself.

To increase the working time, it is possible to condition the two components in a refrigerator for a few hours prior to their use, but the setting time will also be increased by the same factor.

3. Cross linking

When processing at 23 °C, it is recommended to wait an hour after the product has set before using the imprint, in order to benefit from the cured compound’s full properties.

Warning: Crosslinking of RTV vulcanising by polyaddition reaction may be inhibited by contact with products like:

  • latex gloves
  • heavy metal salts
  • amines
  • sulphur and derivatives
  • catalysts of epoxy resins
​Remix each of the two components (part A and B) every time before using.It’s advisable to lightly grease your hands and the object to be copied with edible grease before to mix the two parts of BLUESIL RTV 3536 P A&B. 1. Mixing of the two componentsTo 100 parts of BLUESIL RTV 3536 P A add 100 parts by weight of BLUESIL RTV 3536 P B. The two components are thoroughly mixed together, either manually, or by means of a spatula.2. How to useThen the imprint is taken by pressing the product on the model. Ideally the imprint should be taken in one single application in order to avoid forming joints of the product on itself.To increase the working time, it is possible to condition the two components in a refrigerator for a few hours prior to their use, but the setting time will also be increased by the same factor.3. Cross linkingWhen processing at 23 °C, it is recommended to wait an hour after the product has set before using the imprint, in order to benefit from the cured compound’s full properties.Warning Crosslinking of RTV vulcanising by polyaddition reaction may be inhibited by contact with products likelatex glovesheavy metal saltsaminessulphur and derivativescatalysts of epoxy resins

 

 

Remix each of the two components (part A and B) every time before using.

It’s advisable to lightly grease your hands and the object to be copied with edible grease before to mix the two parts of BLUESIL RTV 3536 P A&B.

1. Mixing of the two components

To 100 parts of BLUESIL RTV 3536 P A add 100 parts by weight of BLUESIL RTV 3536 P B. The two components are thoroughly mixed together, either manually, or by means of a spatula.

2. How to use

Then the imprint is taken by pressing the product on the model. Ideally the imprint should be taken in one single application in order to avoid forming joints of the product on itself.

To increase the working time, it is possible to condition the two components in a refrigerator for a few hours prior to their use, but the setting time will also be increased by the same factor.

3. Cross linking

When processing at 23 °C, it is recommended to wait an hour after the product has set before using the imprint, in order to benefit from the cured compound’s full properties.

Warning: Crosslinking of RTV vulcanising by polyaddition reaction may be inhibited by contact with products like:

  • latex gloves
  • heavy metal salts
  • amines
  • sulphur and derivatives
  • catalysts of epoxy resins
​Remix each of the two components (part A and B) every time before using.It’s advisable to lightly grease your hands and the object to be copied with edible grease before to mix the two parts of BLUESIL RTV 3536 P A&B. 1. Mixing of the two componentsTo 100 parts of BLUESIL RTV 3536 P A add 100 parts by weight of BLUESIL RTV 3536 P B. The two components are thoroughly mixed together, either manually, or by means of a spatula.2. How to useThen the imprint is taken by pressing the product on the model. Ideally the imprint should be taken in one single application in order to avoid forming joints of the product on itself.To increase the working time, it is possible to condition the two components in a refrigerator for a few hours prior to their use, but the setting time will also be increased by the same factor.3. Cross linkingWhen processing at 23 °C, it is recommended to wait an hour after the product has set before using the imprint, in order to benefit from the cured compound’s full properties.Warning Crosslinking of RTV vulcanising by polyaddition reaction may be inhibited by contact with products likelatex glovesheavy metal saltsaminessulphur and derivativescatalysts of epoxy resins

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT