Europe Middle East Africa Change

 

 

 Product

 

 

For more information, please download the TDS available in PDF format below.Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.

BLUESIL FLD 21730

BluesilTM Emulsion 21730 is a cationic macroemulsion of aminopolysiloxane. It is specially developed for application process requested the softener highly shearing stable.

Softness

Emulsion

Fluid

BluesilTM Emulsion 21730 is suitable for different type fabrics especially the synthetic fabrics. The major benefits of the product are:

  • Excellent smooth and fluffy feeling.
  • Excellent soft handle.
  • Low yellowing.
  • Effective on a wide range of fabrics, especially polyester and its blends.
  • It is shearing stable even in large pH and temperature conditions.
  • May be applied by padding or exhaustion

Asia Pacific

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Dry content28Monocomp%
AppearanceColourless to light yellowishMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

Applications by padding:

The concentration of the padding bath should be adjusted to give a pick-up of 0.1 - 1.0 % active content on weight of fabric. The exact level required will depend upon the type of fabric and the level of softening effect required.

The pH of the bath should be adjusted below 5.5.

The fabric should be dried and cured at temperatures in excess of 80°C, however temperatures of 150ºc are recommended. The full softening effect is manifested after adequate fabric conditioning at atmospheric conditions.

When used with organic softening agents or other finishing chemicals the compatibility of the system should be pre-checked prior to bulk use.


Application by exhaustion

Any equipment suitable for exhaustion dyeing may also be suitable for BluesilTM FLD 21730 applications.

A final level of 0.1 - 1.0% active content on weight of fabric will give good performance and optimum levels will depend upon fabric type and required softness.

The pH of the bath should be adjusted to 3.0 - 5.0 and the temperature raise to 50°C prior to addition of BluesilTM FLD 21730. The fabric should be dried and cured.

​Applications by paddingThe concentration of the padding bath should be adjusted to give a pick-up of 0.1 - 1.0 % active content on weight of fabric. The exact level required will depend upon the type of fabric and the level of softening effect required. The pH of the bath should be adjusted below 5.5. The fabric should be dried and cured at temperatures in excess of 80°C, however temperatures of 150ºc are recommended. The full softening effect is manifested after adequate fabric conditioning at atmospheric conditions.When used with organic softening agents or other finishing chemicals the compatibility of the system should be pre-checked prior to bulk use. Application by exhaustionAny equipment suitable for exhaustion dyeing may also be suitable for BluesilTM FLD 21730 applications.A final level of 0.1 - 1.0% active content on weight of fabric will give good performance and optimum levels will depend upon fabric type and required softness.The pH of the bath should be adjusted to 3.0 - 5.0 and the temperature raise to 50°C prior to addition of BluesilTM FLD 21730. The fabric should be dried and cured.

 

 

Applications by padding:

The concentration of the padding bath should be adjusted to give a pick-up of 0.1 - 1.0 % active content on weight of fabric. The exact level required will depend upon the type of fabric and the level of softening effect required.

The pH of the bath should be adjusted below 5.5.

The fabric should be dried and cured at temperatures in excess of 80°C, however temperatures of 150ºc are recommended. The full softening effect is manifested after adequate fabric conditioning at atmospheric conditions.

When used with organic softening agents or other finishing chemicals the compatibility of the system should be pre-checked prior to bulk use.


Application by exhaustion

Any equipment suitable for exhaustion dyeing may also be suitable for BluesilTM FLD 21730 applications.

A final level of 0.1 - 1.0% active content on weight of fabric will give good performance and optimum levels will depend upon fabric type and required softness.

The pH of the bath should be adjusted to 3.0 - 5.0 and the temperature raise to 50°C prior to addition of BluesilTM FLD 21730. The fabric should be dried and cured.

​Applications by paddingThe concentration of the padding bath should be adjusted to give a pick-up of 0.1 - 1.0 % active content on weight of fabric. The exact level required will depend upon the type of fabric and the level of softening effect required. The pH of the bath should be adjusted below 5.5. The fabric should be dried and cured at temperatures in excess of 80°C, however temperatures of 150ºc are recommended. The full softening effect is manifested after adequate fabric conditioning at atmospheric conditions.When used with organic softening agents or other finishing chemicals the compatibility of the system should be pre-checked prior to bulk use. Application by exhaustionAny equipment suitable for exhaustion dyeing may also be suitable for BluesilTM FLD 21730 applications.A final level of 0.1 - 1.0% active content on weight of fabric will give good performance and optimum levels will depend upon fabric type and required softness.The pH of the bath should be adjusted to 3.0 - 5.0 and the temperature raise to 50°C prior to addition of BluesilTM FLD 21730. The fabric should be dried and cured.

 NeedAnExpert

 

 

 CS

 

 

Tissue softenerhttps://www.bluestarsilicones.com/EN/Our_offer/KEC/Pages/CaseStudies/Tissue-softener.aspxTissue softener

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT