Europe Middle East Africa Change

 

 

 Product

 

 

The low viscosity of BLUESILTM EMULSION C655 enables it to be used as delivered or easily to be diluted with water. To dilute, add water to the emulsion, stirring well (high shear mixing is not necessary and not recommended). The reverse procedure (addition of the emulsion to water) is not recommended. Dilutions of BLUESILTM EMULSION C655 should be used as soon as possible after dilution, certainly within 48 hours.

Always pre-test the compatibility of the system when BLUESILTM EMULSION C655 is blended with organic softeners or other chemicals.

For textile treatment, the padding method can be used. The quantity of BLUESILTM EMULSION C655 to be used depends on the type of fabric and the effect and characteristics that are required. Typically the quantity of silicone applied is 0.2 - 2% by weight of fabric. A pH of 5 - 5.5 is recommended for the Finish bath.

For leather treatment, it is recommended that BLUESILTM EMULSION C655 is diluted, typically 1-2 parts Emulsion + 8-9 parts water. BLUESILTM EMULSION C655 can be used in combination with other leather finishing auxiliaries. Spraying or immersion methods may be used for treating leather or artificial leather.

Spraying:

Dosage: Recommended spraying slurry in the top leather is about 10% of the total    formulation

Drying temperature: ~100 ℃

Equilibration: Leave the leather at room temperature for 24 hours after treatment before conducting hand-feel tests.

Immersion:

Dose: 1-5% BLUESILTM EMULSION C655 by weight of the leather

Dilution: Dilute the weighed dose of emulsion with 150-400 parts of water at 40 ℃, stirring well

Treatment: Immerse the leather in the dilution for 10-30 minutes

Drying temperature: 60-100 ℃

Equilibration: Leave the leather at room temperature for 24 hours after treatment before conducting hand-feel tests.

Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.

BLUESIL EMUL C655

BLUESILTM EMULSION C655 is a non-ionic oil-in-water macro emulsion of aminopolysiloxane and α,ω-hydroxydimethylpolysiloxane fluid.

Coating;Fabric Coating;Softness

Emulsion

Emulsion

After drying, the residual film of BLUESILTM EMULSION C655 can provide valuable benefits:

  • Excellent fabric-softening and a smooth, silky feel for wool and textiles,
  • Superior softening and smooth hand-feel for natural and artificial (synthetic) leather,

Deep shine and gloss on leather and when used in maintenance products

BLUESILTM EMULSION C655 can be used in fabric care, wool treatment, leather care, and maintenance products.

  • Fabric softeners,
  • Wool treatments,
  • Leather care,

Additive in maintenance products (polishing).

Asia Pacific

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Dry content55Monocomp%
AppearanceMilky liquidMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT