Europe Middle East Africa Change






RTV 3122 tends to settle during storage, and must be rehomogenised before use. This should be done directly in the original container, either by hand with a spatula, or mechanically with a stirrer.

Be taken to entrap carefully with little air when the catalyst is added, as it would cause bubbles in  the finished product. It is therefore advisable to degas the mixture under a vacuum of 30 to 50 mbar in three to five minutes, applying the vacuum twice in the chamber.  Degassing is quicker in a container with a high diameter: height ratio.

3.Cross linking
At 23°C RTV 3122 will cure in 15h. In order to achieve the best possible performance levels, it is preferable to wait for 72 h before using them.

No special storage precautions noted. Material is stable under normal conditions. Avoid contact with oxidizing agents. For further information, refer to Section 10: "Stability and Reactivity". Use container made of: Suitable plastic material.Please consult the Safety Data Sheet of this product.


Bluesil RTV 3122 + 2% Catalyst 68 is a silicone elastomer with two components, crosslinking at room temperature by a polycondensation reaction.


2 Part RTV


  • Antistatic property for protection from dusts
  • Good tear strength for lasting durability
  • Good ink adsorption and transfer properties
  • Tampography

Asia Pacific

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.




Viscosity< 60000MonocompNF T 76102mPa.s
Gel time40MonocompNF T 77 - 107min
Hardness24MonocompISO 868sh.A
ColorWhite to off-whiteMonocomp
Tear strength> 16MonocompASTM D 624N/mm