Europe Middle East Africa Change

 

 

 Product

 

 

Mixing guidelines:
1. Add 10 parts of BLUESIL ESA 7250 B to 100 parts of BLUESIL ESA .
The two components are thoroughly mixed using an electrical or pneumatic mixer, on a low speed setting so as to limit the inclusion of air in the mixture. A dispensing machine can also be used.

2. After mixing A and B parts, it is preferable to degas the product to eliminate the air bubbles that would be visible in the finished part and which would reduce the mechanical and dielectric properties. Degasing is generally carried out with a vacuum of 30 to 50 mbar releasing the vacuum several times during the operation. A recipient with a high diameter/height ratio is better suited to quick degasing however the height must be sufficient to contain the swelling of the elastomer under vacuum conditions.


3. BLUESIL ESA 7250 A&B is poured slowly and regularly. In the case of a high thickness coating operation, the casting must be made at the lowest point in the volume to be filled this avoids forming and including air bubbles in the volume. It should not be filled totally to allow expansion of the BLUESIL ESA 7250 A&B at service temperatures.

 
4. Recommended curing temperature: 4 hours at 60°C , or 2 hours at 100°C , or 1hour at 150°C.
Certain materials that BLUESIL ESA 7250 A&B may be in contact with when curing could inhibit the reaction. Especially troublesome materials are: sulphur-containing cured natural and synthetic rubber compounds (neoprene, latex, SBR), tin catalyzed silicone rubbers, amine catalyzed epoxies, PVC stabilized with tin salts and some polyurethane elastomers.

 

No special storage precautions noted. Material is stable under normal conditions. Avoid contact with oxidizing agents. Suitable containers: polyethylene. Plastic lined steel drum.Please consult the Safety Data Sheet of this product.ELV;RoHS;WEEE

BLUESIL ESA 7250 A

BLUESIL ESA 7250 A&B is a two component, optically clear, high strength silicone elastomer. This silicone elastomer cures by a polyaddition reaction at room temperature. Curing can be accelerated by heating.

Optical Encapsulant;Optical Transparency;Protection;UV resistant

2 Part RTV

Fluid

ELV;RoHS;WEEE

  • Optically clear.
  • High strength silicone elastomer.
  • Good pourability, for easy filling.
  • Possibility to adding fillers.

 

  • It is particularly suited for potting applications or wherever a tough, elastic and transparent protection is required.
  • Protection of electronic components and electrical engineering equipment by encapsulation or filling.
  • Opto-electronic connections.
  • Insulating photovoltaic cells.

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Viscosity4000PairedCompNF T 76102mPa.s

 Characteristics_B

 

 

Viscosity750PairedCompNF T 76102mPa.s

 

 

 Table_Characteristics_A_And_B

 

 

elongation_68a5ddf2-2baf-4e60-ac6f-0a8a18a758b2elongation_68a5ddf2-2baf-4e60-ac6f-0a8a18a758b2Elongation115PairedMixNF ISO 37%
hardness_cd523e03-72a3-4261-93f9-36f7bbeeafb1hardness_cd523e03-72a3-4261-93f9-36f7bbeeafb1Hardness52PairedMixISO 868sh.A
tensile-strength_e61eb2e0-4dc3-47b0-a61f-b673f1b265dctensile-strength_e61eb2e0-4dc3-47b0-a61f-b673f1b265dcTensile strength6.2PairedMixNF ISO 37MPa

 

 

 

 

BLUESIL ESA 7250 BBLUESIL ESA 7250 B/our_offer/Product/90054788/90054787/BLUESIL-ESA-7250-B

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

Adhesive Silicones Solutionshttps://www.bluestarsilicones.com/EN/Our_offer/KEC/ListInstance_Brochure_Title/AdhesiveSiliconesSolutions_Brochure.pdfAdhesive Silicones Solutions

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT