Europe Middle East Africa Change

 

 

 Product

 

 

To prevent or correct demixing problem, a mechanical stirring with a dispersor at low speed (<100 rds/mn) has to be used.
BLUESIL RES 8360M is used with the addition of a catalyst to accelerate its polymerisation.


The following catalysts may be used:
· 2,4-dichlorobenzoyl peroxide (at a 50 % dispersion) at a rate of 2 % on the product as supplied.
· BLUESIL SICCATIF 15 at a rate of 0.5 % on the product as supplied.


Both catalysts give good results when curing is carried out for fives minutes at 80°C followed by 5-15 minutes at 200°C.
BLUESIL RES 8360M can be used as supplied or diluted as necessary to the required concentration with an aromatic hydrocarbon (toluene, xylene, etc...).
The resin is supplied by brushing, dipping or knife coating. The deposits obtained are normally from 35 to 250 g/m2 dry (thus giving thicknesses of 0.03 to 0.25 mm) depending on the processing conditions and the envisaged applications.


The bond strengths (1) obtained vary depending on the thickness of the deposit and the type of catalyst. Bond strengths are normally between 200 and 800 g/cm.
(1) The force in grams necessary to separate an adhesive tape (width 1 cm) from a sheet of chromed brass.

Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Nitrogen blanketing of containers is required. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.RoHS;WEEE

BLUESIL RES 8360M

BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants.

Adhesion

PSA

Fluid

RoHS;WEEE

BLUESIL RES 8360M offers the following advantages:

  • Maintain its adhesive qualities and flexibility over a wide range of temperatures,
  • Good ageing properties and resistance to water and humidity,
  • Good dielectric properties.

 

The adhesive properties of BLUESIL RES 8360M offer great benefits for the manufacture of:

  • Tapes and coated fabrics based on composites of glass/mica or glass/paper/mica,
  • Pressure sensitive adhesives for glass cloths, glass/mica/silicone tapes, polyester, etc...

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Viscosity2400MonocompASTM D 2196mPa.s

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

BLUESIL RES 8152PBLUESIL RES 8152P/our_offer/Product/90038324/_/BLUESIL-RES-8152P
BLUESIL RES 8160MBLUESIL RES 8160M/our_offer/Product/90050162/_/BLUESIL-RES-8160M
BLUESIL RES 8170PBLUESIL RES 8170P/our_offer/Product/90050161/_/BLUESIL-RES-8170P
BLUESIL SICCATIF 15BLUESIL SICCATIF 15/our_offer/Product/90012893/_/BLUESIL-SICCATIF-15

 SQUARE_NEWS_EVENT_PRODUCT