Europe Middle East Africa Change

 

 

 Product

 

 

Producing glass fibre laminates:
BLUESIL RES 8170P must be used with the addition of a catalyst to accelerate the polymerisation:

  • 1 to 2 ml of BLUESIL SICCATIF 15 for of resin as delivered
  • 1 to 2 ml of Zinc Octoate for of resin as delivered


Remark: When producing thick section parts (> ) the two catalysts can be mixed to avoid risks of cracking.


For information purposes, good results are obtained using the following processing procedure and conditions:
Dilute the catalysed BLUESIL RES 8170P with an aromatic hydrocarbon solvent, so as to obtain a retention rate of approx. 45 to 58 % (expressed in terms of dry matter relative to the fabric) after full immersion in an impregnation bath;

  • Evaporate the solvents and precure by heating for 10 minutes at around 100/115°C.
  • Bind impregnated matter at a pressure of 5,000 to 8,000 kPa for 3 hours at a temperature of 170/180 °C.
  • Demould after cooling.
  • Post cure the laminates in an oven, heated gradually from 100 to (rising by an hour) then maintain at for 12 hours.

If no oven post-curing is performed, keep in the heated press for one hour (instead of 3 hours) at 170/180 °C, then raise the temperature to and maintain at pressure for 6 hours. Demould when cold.

 

STORAGE -20°C Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Nitrogen blanketing of containers is required. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.RoHS;WEEE

BLUESIL RES 8170P

BLUESIL RES 8170P is a methyl-phenyl silicone resin in a 70 % toluene solution.

Adhesion

Resin

Fluid

RoHS;WEEE

BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties.

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Viscosity100Monocompmm2/s

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

BLUESIL RES 8152PBLUESIL RES 8152P/our_offer/Product/90038324/_/BLUESIL-RES-8152P
BLUESIL RES 8160MBLUESIL RES 8160M/our_offer/Product/90050162/_/BLUESIL-RES-8160M
BLUESIL RES 8360MBLUESIL RES 8360M/our_offer/Product/90052786/_/BLUESIL-RES-8360M
BLUESIL SICCATIF 15BLUESIL SICCATIF 15/our_offer/Product/90012893/_/BLUESIL-SICCATIF-15

 SQUARE_NEWS_EVENT_PRODUCT