Europe Middle East Africa Change

 

 

 Product

 

 

PROTECT FROM FREEZING
Stored in the original, unopened container at room temperatures (20-30°C), Bluesil™ EMUL 872RH can be stored for 12 months from the date of manufacture. 
Comply with the storage instructions and expiry date marked on the packaging.
Beyond this date, Bluestar Silicones no longer guarantees that the product meets the sales specifications.

Please consult the Safety Data Sheet of this product.

BLUESIL EMUL 872RH

Bluesil™ EMUL 872RH is a general purpose, non-ionic, aqueous silicone emulsion.

Emulsion

Mold release agent for technical rubber, tires, plastics & foundry products 
 Water repellent and release agent for industrial glassware 
Additive in maintenance products: floor and furniture polishes, products for leather maintenance 
Tack modifier for adhesives 
Slip additive for curable release coatings 
Antifoam in pesticide formulations (for growing crops only) 

North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

As an industrial mold release agent

Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended.

The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad.

 

In the Textile Industry

 Bluesil™ EMUL 872RH may be used as follows:

•      for softening effects as an additive to finish formulations

•      as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate.

 

The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties. 

​As an industrial mold release agent Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended. The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad. In the Textile Industry Bluesil™ EMUL 872RH may be used as follows • for softening effects as an additive to finish formulations • as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate. The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties.

 

 

As an industrial mold release agent

Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended.

The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad.

 

In the Textile Industry

 Bluesil™ EMUL 872RH may be used as follows:

•      for softening effects as an additive to finish formulations

•      as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate.

 

The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties. 

​As an industrial mold release agent Bluesil™ EMUL 872RH is generally used diluted at concentrations of 0.5 to 5.0 % active ingredients. Dilutions can be made by adding 12-120 parts of water to 1 part Bluesil™ EMUL 872RH with moderate mechanical stirring. The reverse procedure (addition of emulsion to the water) is not recommended. The diluted Bluesil™ EMUL 872RH must be applied to clean hot molds (up to 250°C) by spraying, brushing, or wiping with a pad. In the Textile Industry Bluesil™ EMUL 872RH may be used as follows • for softening effects as an additive to finish formulations • as a brightener for natural or synthetic furs. The treatment is done using spray or lick roll techniques, and drying occurs under the usual conditions. Bluesil™ EMUL 872RH gives no water repellency to the substrate. The quantity of Bluesil™ EMUL 872RH used will depend upon the desired effect and properties.

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT