Europe Middle East Africa Change

 

 

 Product

 

 

In order to achieve maximum product efficiency, it is necessary to have perfectly clean and dry surfaces.


Applying the primer:
The primer is applied to the porous surface using a clean paint brush. The product's viscosity is ideally suited to optimum coverage when applied with a brush. The primer is sensitive to atmospheric humidity, which can cause partial hydrolysis of the active ingredients if the packaging remains open. It is recommended to pour a little primer into an intermediary receptacle, and especially not to dip the brush directly in the original packaging. The appearance of a cloudy liquid in the recipient means that it must no longer be used.
The surface must be scrupulously protected from soiling whilst the primer is drying.
The primer should be applied with the material at a temperature of between + 5 °C and + 30 °C.


Consumption: around 200 g/m².


Drying time:
This depends on ambient humidity and the surface porosity.
At around 20 °C a drying time of around 30 minutes enables good adhesion properties to be obtained with optimal performance levels being obtained when the primer is perfectly dry to the touch.

Please consult the Safety Data Sheet of this product.

BLUESIL PRIM 12076

BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers.
BLUESIL PRIM 12076 can be used on most porous surfaces.
It comes as a colourless, ready to use solution of reactants diluted in a solvent.

Adhesion;Sealant;Sealing

Primer

Fluid

BLUESIL PRIM 12076 is used in combination with sealants on porous surfaces such as concrete, marble, brick, wood, etc.
The assemblies produced in this way can withstand immersion as long as it is not for too long (1 to 3 months at most, also dependent on the surface and the sealant used). This primer is recommended for use with all silicone sealants, including water based technology sealants. For non-porous surfaces, a different primer is recommended (BLUESIL PRIM 10073).

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Specific Gravity0.99Monocompg/cm3
Flash point9Monocomp°C

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

Constructionhttps://www.bluestarsilicones.com/EN/Our_offer/KEC/ListInstance_Brochure_Title/Construction_Brochure.pdfConstruction

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT