Europe Middle East Africa Change

 

 

 Product

 

 

Typical formulation of a microemulsion:
Product: %
BLUESIL ECOSOFT : 20
Glacial acetic acid : 0,2
Surfactant C13[EO]6 : 8
Diethyleneglycol monobutyl ether : 2
Water : 69,8
Procedure:

  • Mix together : water I, acid, glycol and surfactant.
  • Heat to 45-50°C.
  • Gradually add the oil, stirring continuously, until all the oil is added.
  • Then continue stirring whilst cooling to below 30°C

Typical macroemulsion formulation
Ingredient : %
BLUESIL ECOSOFT3 : 5
Glacial acetic acid : 0.3
Surfactant C13[EO]6 : 5.0
Diethyleneglycol monobutyl ether : 2
Water (Part I) 25
Water (Part II) 32.7


Procedure:

  • Mix together: water Part I, acid, glycol and surfactant.
  • Heat to 45-50°C
  • Gradually add the oil, stirring continuously, until all the oil is added.
  • Gradually add water Part II, stirring continuously.
  • Then continue stirring whilst cooling to below 30°C.

Specific formulations and assistance in fluid handling are available from Bluestar Silicones technical staff, in the event that they may be required.

 

Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.GOTS;OEKO-TEX

BLUESIL ECOSOFT

BLUESIL ECOSOFT is a medium to low viscosity diamino functionalised polydimethyl siloxane, specially developed for formulation to emulsions for textile softening and textile resin plasticising.

Softness

Functional Fluid

Fluid

GOTS;OEKO-TEX

BLUESIL ECOSOFT is designed for use as a base fluid for formulation of amino silicone emulsions specifically to be used as textile softeners and lubricants.
In application to textiles the product typically yields:

  • Smooth soft hand
  • Good drape characteristics
  • Low yellowing
  • Increased fabric elasticity and crease recovery
  • Improved fabric tensile and tear strength

Typical end uses include cellulosic and man made fibres on woven, knitted and non woven fabrics and as a lubricant in raising and sueding.

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Viscosity325MonocompAFNOR T 60mm2/s
AppearanceClear to slight haze free of suspended matterMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT