Europe Middle East Africa Change

 

 

 Product

 

 

Applications by padding
When used alone, BLUESIL EMUL 12 should be diluted with cold water. The concentration of the padding liquid should be adjusted to give a pick-up of 1.0% to 2.0% silicone content on weight of fabric.
The pH of the bath should be adjusted below 5.5.
The fabric should be dried and cured, temperature of 150ºC is recommended.
When used with SILCOLEASE EMUL 70827 A, dilute the catalyst in water and then add this to the already diluted emulsion. The 20% of SILCOLEASE EMUL 70827 A, based on the amount of BLUESIL EMUL 12 is recommended to achieve excellent and durable water repellence.
The concentration of the padding liquid should be adjusted to give a pick-up of 1.0 - 2.0% silicone content on weight of fabric. The pH of the bath should be adjusted bellow 5.5. The exact level required will depend upon the type of substrate. The fabric should be dried and cured, temperature of 150ºC is recommended.
Although BLUESIL EMUL 12 is compatible with the majority of resins used in textile finishing, the compatibility of the system should be pre-checked prior to use.

Avoid discharge into drains, water courses or onto the ground. Store in original tightly closed container. equipped with a degassing device. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures.Please consult the Safety Data Sheet of this product.GOTS;OEKO-TEX

BLUESIL EMUL 12

BLUESIL EMUL 12 is a macro-emulsion of a functional silicone which lubricates textile fibers and rubber tapes. Also it imparts durable water repellence to textile substrates when used with SILCOLEASE EMUL 70827 A,

Coating;Fabric Coating;Softness

Emulsion

Emulsion

GOTS;OEKO-TEX

BLUESIL EMUL 12 provides following properties and advantages:

  • Makes all types of textile substrates hydrophobic
  • Gives durable water repellence when used with an appropriate catalyst.
  • Lubricates textile fibers including elastomeric fibers.
  • Lubricates rubber tapes and threads.
  • Imparts a slippery touch.
  • Improves tear strength and abrasion resistance.
  • Improves the ability of sewing.
  • Is compatible with the majority of resins used in textile finishing.
  • May be applied by padding or spraying.

 

  • Lubrication of rubber tapes for garments.
  • Hydrophobic treatment of textiles.

Europe Middle East Africa

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Dry content27.5MonocompISO 3251%
Appearancewhitish low viscosity emulsionMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT