Remix each of the two components (part A and B) every time before using.
1. Mixing of the two components
To 100 parts of BLUESIL RTV 3535 P A add 100 parts by weight of BLUESIL RTV 3535 P B. The two components are thoroughly mixed together, either manually, or by means of a spatula
2. How to use
Then the imprint is taken by pressing the product on the model. Ideally the imprint should be taken in one single application in order to avoid forming joints of the product on itself.
To increase the working time, it is possible to condition the two components in a refrigerator for a few hours prior to their use, but the setting time will also be increased by the same factor.
3. Cross linking
When processing at 23 °C,, it is recommended to wait an hour after the product has set before using the imprint, in order to benefit from the cured compound’s full properties.
Warning: Crosslinking of RTV vulcanising by polyaddition reaction may be inhibited by contact with products like:
- latex gloves
- heavy metal salts
- sulphur and derivatives
- catalysts of epoxy resins
|STORAGE t < +40°C IN ITS ORIGINAL PACK||Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Store in tightly closed original container. Suitable containers: polyethylene. Steel drums coated with epoxy-resin.||Please consult the Safety Data Sheet of this product.|
BLUESIL RTV 3535 P B
BLUESIL RTV 3535 P A&B is a two-component silicone elastomer which cures at room temperature by a polyaddition reaction and leads to a flexible and elastic material.
2 Part RTV
- Easy processing
- Low linear shrinkage
- Very Quick curing
- Good imprint definition
- Taking quick imprints in the production of tooling and master prototype models sectors.
Asia Pacific;Europe Middle East Africa;Central and South America
|For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.|