Europe Middle East Africa Change

 

 

 Product

 

 

Examples of applications by padding
When used alone, BLUESIL EMUL 21837 should be diluted with cold water. The
concentration of the padding liquid should be adjusted to give a pick-up of
0.2 - 2.0 % silicone solids on weight of fabric. The exact level required will depend upon
the type of fabric and the level of softening effect required. The fabric should be dried
and cured at temperatures in excess of 80 °C.
Very dilute mixtures of the product should be stored for no longer then 48 hours at
ambient conditions. When used with organic softening agents or other finishing
chemicals the compatibility of the system should be pre-checked prior to bulk use.
Although BLUESIL EMUL 21837 is compatible with most organic softeners and
chemicals the emulsion stability may be affected under extreme conditions.


Examples of applications by exhaustion
As BLUESIL EMUL 21837 is shearing stable it is suitable for use from a range of
dyeing equipment. Any equipment suitable for exhaustion dyeing will also be suitable
for BLUESIL EMUL 21837 application.
A final level of 0. 2 - 2.0 % silicone solids on weight of fabric will give an excellent
handle and optimum levels will depend upon fabric type and required softness.
The pH of the bath should be adjusted to 3.0 - 5.0 and the temperature rose to 50 °C
prior to addition of BLUESIL EMUL 21837. The BLUESIL EMUL 21837 should then be
added and the temperature held at this level for 45 - 60 minutes when exhaustion takes
places. The bath should now be dropped and the fabric hydroextracted prior to drying /
curing at a suitable temperature above 80 °C (see padding information).

PROTECT FROM FREEZINGAvoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Keep container tightly closed and dry. Suitable containers: Steel drums coated with epoxy-resin.Please consult the Safety Data Sheet of this product.GOTS;OEKO-TEX

BLUESIL EMUL 21837

BLUESIL EMUL 21837 is a high activity emulsion of an amino functional silicone. When applied to textile fabric an elastomeric silicone finish is produced which gives an excellent soft handles and stabilisation to the structure of the fabric.

Softness

Emulsion

Emulsion

GOTS;OEKO-TEX

The major features and benefits of the product are listed below:

•Very low yellowing even at high temperatures

•May be applied by padding or exhaustion

•Compatible with most organic softeners

•Compatible with most other textile finishing chemicals

•Dilution stable

•Effective on a range of textile types

•Shear stable

•Stable to electrolyte and hard water

•Stable across a wide pH range

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Dry content40MonocompISO 3251%
AppearanceWhite low viscosityMonocomp

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT