|Avoid discharge into drains, water courses or onto the ground. Store in tightly closed original container. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Avoid contact with oxidizing agents. Vulcanises at room temperature on contact with moisture in the air. For further information, refer to Section 10: "Stability and Reactivity". Suitable containers: Steel drums coated with epoxy-resin.||Please consult the Safety Data Sheet of this product.||RoHS;VOC|
BLUESIL SLT 10T PVC WHITE
BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints.
It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity.
BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.
1 Part RTV Alcoxy
BLUESIL SLT 10T combines the advantages of a primerless adhesion elastomer and neutrality on most construction materials, including porous surfaces.
BLUESIL SLT 10T can be used on clear glass, layered glass and all other glazed surfaces, metals, wood (painted or otherwise), PVC, polycarbonates, polymethacrylates, ABS, concrete, cellular concrete, granite, marble, etc.
BLUESIL SLT 10T does not generally cause staining of surfaces. Nonetheless, specific testing is required in the instance of sensitive surfaces, especially porous ones (marble, stone, etc.).
Chemical resistance: once cured BLUESIL SLT 10T has good resistance to diluted bases and to salt mist. We can also observe good behaviour to the temporary action of common solvents and hydrocarbons with for the latter, slight swelling of the sealant during exposure. However, we can note modification to a greater or lesser extent of its characteristics under the action of acids and chemical oxidants.
Its mechanical and adhesive properties are not affected by solar radiation, rain, snow or ozone and enable it to perform its function over many years.
BLUESIL SLT 10T is specially intended to produce sealing and bonding joints in the construction and glazing industries. It provides an elastic and long lasting seal in the instance of :
- Heavy prefabrication and traditional masonry work.
- Partition walls, panels and façades, metal framework.
- Elastic seals in glazing applications, on aluminium, wooden, PVC frames, etc.
- Joints for terracing, fireplaces, acroters.
- Ventilation ducts, piping passages, guttering and downpipes.
- Bonding of mirrors.
- Bonding of materials subject to vibrations.
Asia Pacific;Europe Middle East Africa;Central and South America;North America
|For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.|