BLUESIL EMUL 1803 should be diluted by adding soft water (TH < 20°), to a concentration suitable for the method of application (spray gun or pad).
The moulds must be clean when the non-adherent treatment is applied. As a general rule, one application of BLUESIL EMUL 1803 is sufficient for between two and ten uses of the mould.
The number depends on the complexity of the mould and on the material used.
|Avoid discharge into drains, water courses or onto the ground. Store in a cool, dry place with adequate ventilation. Keep away from incompatible materials, open flames, and high temperatures. Store above freezing. Store in closed original container at temperatures between 5°C and 30°C. Suitable containers: polyethylene. Steel drums coated with epoxy-resin.||Please consult the Safety Data Sheet of this product.||RoHS|
BLUESIL EMUL 1803
A non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers.
Chemical Protection;Coating;Film Former;Fire Protection;Lubrication;Non-stick;Release;Shine;Slip
VERY EASY AND SAFE TO USE, BECAUSE THE THINNER IS WATER
Durability of the film on the mould surface
Easy cleaning of treated moulds
The shoes industry: soles, heels, etc.
The car industry: armrests, dashboards, steering wheels, etc.
Asia Pacific;Europe Middle East Africa;Central and South America;North America
|For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.|