Europe Middle East Africa Change

 

 

 Product

 

 

It is recommended to apply BLUESIL PAST 7 onto clean and dry surfaces (degreased if necessary).
BLUESIL PAST 7 is applied with a brush, with a paint brush, with a spatula or with a paste gun.
BLUESIL PAST 7 can be diluted in aliphatic or chlorinated solvents to facilitate its application when being applied in thin coats.

STORAGE t < +40°C IN ITS ORIGINAL PACKNo special storage precautions noted. Material is stable under normal conditions. Avoid contact with oxidizing agents. Use container made of: Plastic lined steel drum. Suitable plastic material.Please consult the Safety Data Sheet of this product.ELV;RoHS;VOC;WEEE

BLUESIL PASTE 7

BLUESIL PAST 7 is a polydimethylsiloxanic oil based silicone paste together with inert fillers. This paste is particularly adapted to mould release applications in the rubber, plastics and timber industries, etc.

Paste & Grease

Paste

ELV;RoHS;VOC;WEEE

 

  • Does not burn onto the moulds.
  • Reduces maintenance.
  • Reduces the part reject rate.
  • Improves the appearance on the moulded parts.

 

 

  • Mould release agent in various industries, notably in the plastics processing industry.
  • Manufacture of low pressure laminates in phenolic resins or polyesters.
  • Lubrification of systems containing plastics.

 

Asia Pacific;Europe Middle East Africa;Central and South America;North America

For information about Storage and Shelf Life for this product, please download the Technical Data Sheet.

 Characteristics_A

 

 

Worked penetration<350MonocompASTM D 2171/10mm
Exudation<10Monocomp%
Volatile Content<5Monocomp%
Rested penetration270MonocompASTM D 2171/10mm

 Characteristics_B

 

 

 

 

 Table_Characteristics_A_And_B

 

 

 

 

 

 

 

 

 

 

 NeedAnExpert

 

 

 CS

 

 

 SS

 

 

 PressRelease

 

 

 

 

 Brochures

 

 

 TDS

 

 

 

 

 

 

 SQUARE_NEWS_EVENT_PRODUCT